SHOWER & SINK CONFIGURATION
  • SHOWER & SINK CONFIGURATION
  • SHOWER & SINK CONFIGURATION

SHOWER & SINK CONFIGURATION

KAR-005145

Instant boilers heat water directly, without using a water storage enclosure. When the faucet is open, cold water flows through a hose to the unit. An electric resistance heats the water. As a result, instant boilers constantly supply hot water. You don't have to wait for a tank to be filled with water and then heated.

The accessories delivered together with the device are imperative enough for the correct operation of the device.

The package contains:

 

  • Geyser mode (Geyser New)
  • finger filter
  • ¾" diverter valve
  • pressure hose 0.4 m
  • ½" diverter valve
  • the swan with pearler
  • shower hose 1.5 m
  • adjustable shower faucet
  • shower stand
  • dowels, dowel screws
  • gaskets

 

Security policy

 

Delivery policy

 

Return policy

Description
  • Supply voltage: 230 V
  • Maximum power: 5000 W
  • Selectable work steps: 2000 W, 3000 W, 2000 W + 3000 W
  • Maximum temperature of heated water: 64ºC
  • Heating elements: immersion heater type, in copper sheath and sintered insulation
  • The power of the heating elements: 2 kW first stage / 3 kW second stage
  • The working mode of the heating resistors: in economic mode (separate 2 kW or 3 kW) / in maximum mode (simultaneously 5 kW); the operation of each resistance is signaled brightly with the LED incorporated in the related control button
  • Maximum heated water temperature: 60 ºC, overheating: 40 ºC at a flow rate of 1.5 liters / min. (maximum power regime 5 kW)
  • Minimum water pressure at the device entrance: 0.04 MPa (0.4 bar = 4 meters of water column)
  • Heated water flow rate: adjustable from the supply tap, depending on the desired inlet and outlet water temperature, respectively the selected heating level
  • Degree of protection: IP 54
  • Protection against electric shock: class I (all active electrical components are isolated from the water heating circuit and the manual controls of the device; it is provided with a protective conductor)
  • Moisture protection: IP X4 (against splashes of water)
  • Functional protection: in the event of over-temperature and in the event of an accidental drop in the water supply flow, (thermolimiter and pressure switch with double contact)
  • Sanitary protection: the water heating circuit is made of sanitary approved components (they are not corrosive and do not contain toxic components)
  • Dimensions: 280 x 175 x 110 mm
  • Accessories included
Product Details
KAR-005145
16 other products in the same category:

Reference: PAV-11001

Brand: Battipav

Agile tile system

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ: MAXIMUM AND MINIMUM BARS LENGTH: 3300 mm - 1720 mmMAXIMUM AND MINIMUM BARS WIDTH: 1580 mm - 840 mmPACKING DIMENSIONS: 1795 x 640 x 255 mmNET WEIGHT: 46.0 kg ΤΟ ΣΥΣΤΗΜΑ ΠΕΡΙΛΑΜΒΑΝΕΙ: 2 τηλεσκοπική μπάρα με 2 λαβές και 6 βεντούζεςΖευγάρι πόδια στήριξηςΖευγάρι τροχών

Reference: TOT-TSB10810

Brand: Total - Hand Tools

TOTAL ΓΩΝΙΑ ΡΑΦΙΩΝ ΛΕΥΚΗ 20 Χ 25cm 2ΤΕΜ

Διαστάσεις βραχίονα : 8" X 10" (20 X 25cm) Πάχος : 1.1mm Δυνατότητα φορτίου (ανά ζεύγος) : 25Κg 6 σημεία προσάρτησης Ασπρο χρώμα Περιλαμβάνει : 2 τεμ. στηρίγματα ραφιών, 12 βίδες προσάρτησης Συσκευασμένο με χάρτινη κάρτα Συσκευασία : 12 ζεύγη

Reference: BIH-TCC1200

Brand: BIHUI

TILE CUTTER 6-15MM THICKNESS

MANUAL TILE CUTTER,CUTS TILE 4-16MM THICKNESS, FOR TILES, PORCELAIN ,CERAMIC, MOSAICS ETC., ALL KINDS OF TILES, THE TOLERANCE : WITHIN 1.0MM 1200MM/47-1/4"  Aluminium die casting one-piece base, strong and durable Single guide rail with built-in ball bearing system, easy for cutting big tiles Ergonomic soft grip handle, labour-saving Extension bars to...

Reference: RIG-2301

Brand: Safety Products

STOP BATS

Χρησιμοποιείται για τον έλεγχο της κυκλοφορίας. Σε αντανακλαστικό υλικό με εξαιρετικά ανθεκτικές πινακίδες αλουμινίου διαμέτρου 450 mm Με λαβή αλουμινίου με δυνατότητα επέκτασης από 1,1m έως 2μ

Reference: KEF-0014000747

Brand: KEFREN Adhesives

KEFRÉN PVC ST-47 U-PVC SOLVENT CEMENT - PRESSURE & DRAINAGE 1000ml

Ειδική κολλά για σωλήνες και εξαρτήματα U-PVC γενικής χρήσης (συστήματα πίεσης και αποστράγγισης). Συνιστάται για συστήματα πίεσης και αποστράγγισης και όπου απαιτείται ρύθμιση μέσης ταχύτητας. Επιτρέπει μικρές διορθώσεις κατά την εγκατάσταση. Μέτρια Ταχεία Θεραπεία.

Follow us on Facebook